Thursday, April 19, 2012

The Lost Trade of Stone Cutting

An essay by Joseph Conrad describing stone construction before gang saws or compressed air, 1800 to 1900


Have you ever thought about how those old stone churches, so much a part of 
Portland’s identity, were built? Walking with my father, the stonecutter, gave 
me an interesting insight back in 1965.








People who work with stone can leave permanent marks on the urban landscape. I call these “Stone Footprints.”

Introduction

Thirty years ago when I was designing our company logo, I sketched a derrick lifting a mill block from a granite batholith and titled the company, "Joseph Conrad, Stonecutter," doubting that anyone would understand what the logo was or what the title "stonecutter" means. The quarry and the trade had both been long forgotten.



Back in 1917, Portland had a significant stone cutting industry, with 17 to 20 companies that supported hundreds of people. The times and technology changed over the years. By 1980, about the time I was designing my company logo, Portland had only one stone company, which probably supported 10 to 15 people. Styles and tastes changed, and today, Portland may have around 30 stone companies supporting perhaps 500 people. But during these changes much has been lost, for few of the people in the current stone industry have any sense of history or an interest in stones other than as a means to make a living-although all of them demonstrate a healthy sense of romance towards stone, since that is an integral part of the stone business. People who work with stone can leave permanent marks on the urban landscape. However, since for the most part, the urban landscape is defined by dimension stone- sandstone, limestone, marble, and granite-for this, we need to look at the sources of these materials to understand how these materials shape our city. The urban landscape I call "stone footprints" for the most part is defined by technologies at stone saw mills, which are far from local stone workers. But here I will focus on the small but important part of our past. The stonecutter, a long forgotten trade.

This is my personal understanding of the stonecutter. I have for most of my life lived on the West Coast so I can speak little of the great body of stone history mostly located on the East Coast. So my knowledge is somewhat local and does not include the work of marble cutters, again the result of geography. And of course it excludes the monumental efforts of European stone workers of the 13th through 15th centuries.

People who work with stone can leave permanent marks on the urban landscape. I call these “Stone Footprints.”


A stonecutter by definition is one who cuts a stone by hand to a specific size to fit in a specific location. Among other cut stone pieces making the whole, most often for a building.

I donated a book to the stone museum some years ago outlining the work of the stonecutter. It was about 45 pages, 5” x 7” pocket manual, filled with geometry, math equations of shapes describing solutions to architectural problems. I think these sorts of working manuals existed for many trades then. It was very complex reading, so I couldn't understand much. Imagine cutting a circular stair casing complete with step, facing, outside, and inside walls, with a circular base and the hand rail, banisters in granite or marble. Columns that fit, cutting the flutes in columns, arches, door frames, windows frames, sloped sill coping, floors and ceiling radial patterns or grades that wrap around a city block and align perfectly. A lot of three-dimensional math is required.

Stonecutter's Geometry: Ramp & Twist


The first job I had in this industry was laying out large complex shapes full size on the floor of a pattern room, then making zinc templates of each piece for stonecutters to apply to individual stone while shaping it in 1959. I don't know if early stone cutters had the luxury of such patternmaking , but developing complex shapes in three planes with stone was part of their job. I presume to know a little, but my father and my two older brothers could calculate what dad called ramp and twist. My younger brother who was an artist in stone and I could not. The modern era of the stonecutters in the United States was from 1800 to 1920, when they were replaced by the gang saw (for the most part) although they still exist in large architectural and Memorial fabrication facilities is in the Midwest, East and Southeast, with the help of sawn slabs. I read once there may be 300 stonecutters left in the United States.

Stonecutters learned to pitch stone with minimal effort.


I briefly apprenticed in a fabrication facility cutting dies, slants, hickeys and bases for monumental dealers. They mostly used 6 inch and eight inch sawn or polished slabs of granite. Stonecutters talk of the subtleties of each type of granite amongst themselves. They all pitch differently. These Memorial cutters are offended by point marks or ill- defined corner lines, a sign a failure in stone cutting. You won't survive as a memorial cutter if you can't drive a clean pitched face on a 10" slab of granite cutting from two sides with the handset and a specialized stonecutter's hammer. Stonecutters would stun a modern stone worker or government ergonomics inspector. No stonecutter could work with bent elbows. Swinging a 1 1/2 to 3 pound hammer 8 hours a day requires work to be at hip level.


Apprentice cutters were called lumpers whose job was to shovel up spalls for the stonecutters. I think there were many extra labor jobs back then. I met a stone polisher in Portland in 1968 who told me he knew my uncle Ted, a bricklayer and stonemason when he was a teenager working as a water boy for masons. Back then marble setters (installers) wore white shirts and ties in Portland in the 1920s and 30s. Even though I worked in the stone trade for 15 years and had four years of college, I needed to attend a year long Saturday brick layer school and serve a three-year apprenticeship before I was given a marble masons union card in 1975. Standards for craftsmen then were much more rigid, but today almost anyone can call himself a stone artisan.

My father told me that there were 2000 stone workers living in the Knowles, California granite quarry in 1920 when he worked there. They were building San Francisco's city, state and federal buildings, post offices, courthouses, City Hall and the Customs house. To me, these buildings are the most beautiful parts of San Francisco, all of which were built out of Sierra Nevada granite. We walked around several abandoned quarries looking at granite foundations of stone bunk houses in the lonely foothills of Madera County California. All gone now, flowers, live oak, and abandoned quarry holes full of water. They are on private property ranch land, with no easy access. These old quarries exist all over the country, a remnant of another time.

Back then the stonecutter traveled from job to job, city to city, following the work. They worked with local materials, giving rise to the urban identities we can still recognize. This was well before modern day mass production steel frame, stone skin buildings.

There is an architectural expression that cities reflect the ground they are built on.


Here are some examples of local stone that gave rise to urban identities back then:

• Portland Oregon, basalt and sandstone churches
• Vancouver BC-B.C. granite waterfront and public buildings
• San Francisco Sierra Nevada white granite public buildings
• New York City brownstones
• Austin Texas pink granite capital, historic public buildings
• Moriello Mexico, city of pink limestone
• Jerusalem yellow limestone
• Minneapolis Canadian shield granite and Kasota stone.

The list goes on: cityscapes defined by local stone, a connection to the past, stone providing a sense of place.



In fact, I often visit the Central Montana town of Lewistown. Croatian immigrant stonecutters, who settled there in the 1800s, built it out of local sandstone. When I first visited no one seemed to know the source of the stone. After making inquiries I found my daughter-in-law's great aunt Mary who was ready and willing to help me. Two years later she took me the town’s old quarry. We took some pictures. There is a strong sense of local pride in Lewistown where the old stonework has not been painted over or covered by trendy designs.

I have spent 5 working vacations attempting to reopen old marble quarries in Southeastern Alaska (once owned by the Vermont Marble Company). These quarries provided much of the stone used on buildings throughout the West. 60,000 blocks remain in the rain forest there on Marble Island. A pile of white marble 40 feet long, 40 feet high and 3 miles long still lies on the ground covered by thick layers of moss.

See Stearns County Minnesota for a great video on the history of stone

I have only found four places in the world where traditional stone cutters are still celebrated, by showing their tools in display cases. There may be others. The first is the state historical Center in Helena Montana and, second, a state building in Vienna Austria. Both honor stone craftsmen. The third is the Stearns county museum in Minnesota, where I grew up. This building is located next to a granite quarry that is now used as a nature park. It has a sunken man-made exhibition quarry in it showing the tools of the trade. It is a shame that Tenino Washington does not have an exhibition since its community pool is an old quarry. The Vermont marble company has a museum that recalls when their company once controlled almost all the marble work in the USA. However its more gratifying when noncommercial individuals provide the history lesson. It seems to suggest a more sincere interest.

As my father and I continued walking around abandoned quarry he told me stonecutters of his era were paid a dollar per hour and train fare to and from their home state. Great wages. By comparison, electricians received 60 cents per hour at the same time. No wonder the stone cutters strutted the streets of San Francisco with their wooden foldup tape measures in their back pockets on Sundays.

I don't know the exact delineation of jobs, but stonecutters worked at both the quarry and the actual jobsite at this time. In 1965 I was visiting with a 75- year-old memorial dealer from the bay area. He joked that so much stone dust came from a job shack that the insurance rates went up to the business across the street in San Francisco. In that era some lived, some died, my father told me he never expected to see 40 years. His three stonecutter brothers didn't live beyond 45.



I recently erected an 8’ by 6’ screen wall in my front yard. Looking out the window, I noticed it has a twist in it caused by its end posts not being in perfect alignment. My dad would have called this a wine, I suppose from the word winding. Can't have this in stone construction, it would eventually fall. Gravity disapproves.




Stonecutters and bricklayers are unique among tradesemen. They insist on their work being absolutely level and plumb.

Later, Dad and I came across a piece of granite –five feet wide, five feet long and 6 inches thick-lying among the wildflowers. All the edges were rough split top and bottom broken face. Interestingly, there was a perimeter of 3 to 4 inches of point marks all around it. I asked my father what this was. I can still see him 50 years later. “You don't know? That's a level seat! The stonecutter prepared this stone for the surface drifter to hammer point the top flat to his marks. Years later it dawned on me, this is the fundamental beginning of every building stone ever cut. The stonecutter from 1900 to present had the advantage of compressed air to help them shape the stone, but it's still all begins with a level seat the stonecutters first step.*

So far the so for the sake of experimentation let's think of the process stonecutters must have used before Ingersoll's book, The Uses of Compressed Air was published around 1895. I can only speculate the work of the stonecutter before compressed air. (I will chronicle what I call deep drilled hammer face compressed air technology another time.)


Bit is turned with each hammer blow. My son told me they still have in drilling contests in granite in Reno Nevada. Probably due to railroad building for explosives through the Sierra Nevada. I believe that Sullivan Channler used steam power in Alaska quarries at the turn of the century to chisel. I don't know if steam energy was used to drill. But I doubt it was used to drill stones locally. Hammer and chisel most likely. I watched my father drill this way in concrete at his Lake home where we had no electricity.





St. Patrick's
1st Presbyterian 1887
1st Congregational 1891

St. James Lutheran

1st Baptist 1894



Previous essays about stone by Joseph Conrad

"Stone Cutters Provide The Human Touch", Stone World Magazine 1996

"Heroes Of Local Knowledge", Portland's Future Magazine 1998

"Footprints In Stone", Field Trip To Downtown Portland For The Geological Society Of Oregon 2003

"Stone And Icabana" Lectures To Portland Icabana Society In The Portland Japanese Garden; 1999

"Exploring Historic Stone Quarry In Southeast Alaska", Lectures To Oregon Historic Architectural Society 2000

"The Influence Of Stone Production Techniques On Urban Morphology, A Historic Review Of American Stone Technologies And Its Influence On Cityscapes", Shown At The University Of Portland Library Art Exhibition 1995




















51 comments:

  1. Dear Mr. Conrad,

    I just returned from a trip to Italy with my family and was amazed at the stone and brick work from the ancient Roman age to recent times. Even the hotels we stayed at were like museums to the stone cutter's art and skill. I loved the cobble stone streets and walk ways with swirling patterns. I need to break pavers to try to "cobble" together a brick path way in my back yard and was looking to see what a stone cutter's hammer looks like when I saw your fascinating article about the lost art of stone cutting. My brick pathway will be quite rudimentary, as I did not plan on it being otherwise, but I will think about you and the ancient stone cutters of the past as I try to shape pavers to fill in the gaps.
    Have a chipper day!
    Janet Monteith-Wong

    ReplyDelete
    Replies
    1. This comment has been removed by a blog administrator.

      Delete
  2. In many History Channel shows about ancient stone construction, I see a tool or device being used to check for level, or smoothness of stone facings, or whatever.It is about the size of a torpedo level, but it is not a fluid level. It appears to be a single piece of metal with a series of dime sized holes along it's length, which apparently serves the main function of whatever the device is being used for. What is it? What's it called? What is it doing, and how is it doing it?

    ReplyDelete
  3. Great post. I was wondering a similar question regarding stone cutting as "hoosierguy". Also, most these stone structure were built without the use of any type of mortar is that correct? Meaning that the stones had to fit perfectly together?

    ReplyDelete
  4. Wow, I would just like to say that all that stone cutting work is just incredible. I have never seen anything like it and I am shocked at how beautiful it is and all the variety that goes with it! Can you tell me where I can find more designs that could be done! Thanks for sharing!

    ReplyDelete
    Replies
    1. thank you for your interest suzy frame,I am interested mostly in history of stone and its effect on urban form,, I dont know of any other person doing anything like this , I DONT KNOW WHY. to see other essays I have posted at my blogsite go to http://stonecutter.blogspot.com

      Delete
  5. This is so interesting! I watched a film about stone cutting in one of my classes and have become really intrigued. I hope you continue documenting your experiences.

    ReplyDelete
  6. This was a great essay! I am in an Art History class and we linger on stone cutting quite often! It is definitely a lost art.

    ReplyDelete
  7. Thanks for the wonderful post on stone cutting. I find it so interesting and it's a shame people don't recognize it as much anymore. Thanks for the wonderful insights!

    ReplyDelete
  8. Hey, are you sure you aren't secretly an artist? because that was some good sketching of stone cutting.

    ReplyDelete
  9. Thanks for this great essay Joseph! I'm surprised I had not come across it before. I have been working on a group research project in Minnesota about the workers involved in the construction of the Minnesota Capitol building (1896-1905). Of course, the granite came from your old home town and was cut there. The marble came from Georgia and was cut in St. Paul. Stonecutters came from all over the country to work on that job.
    I'd like to read your other essays. Are they available? Also, could I send you something I've written about the stonecutters who worked on the Capitol here? John Sielaff

    ReplyDelete
    Replies
    1. john send me your email address so I can reply to you, my email address is josephconrad1@msn.com

      Delete
  10. This is the right blog for anybody who desires to find out about this topic. You realize a lot it’s virtually exhausting to argue with you (not that I truly would want…Ha-ha). You undoubtedly put a new spin on a topic that’s been written about for years. Great stuff, just nice!
    Stone Split Face

    ReplyDelete
  11. thank you for your interest Kurban, I try to present what I have found in the last 50 years

    ReplyDelete
  12. Hi Joseph

    You have done nice job. Thanks for sharing this information with detailed description.

    Granite Cutting

    ReplyDelete
  13. This comment has been removed by a blog administrator.

    ReplyDelete
  14. I've recently purchased two stone setting wood Derricks in decent condition. They are in pa. I can be contacted at s24speedex@concast.net

    ReplyDelete
  15. Its very interesting and your products is very much beneficial use for the customers but i have to say that we also deals in same Product granite saw used Leads the products like: Bridge saw and bridge saw
    granite
    and so many used Marble bridge saw products for use of the customers.

    ReplyDelete
  16. You don’t need regular granite countertops care if you buy the best products from Stone Mart. Talk to us right now!

    ReplyDelete
  17. Hi , I've read a few things on this site and I really do think that it has helped tremendously. There's still a heap I need to learn thus can continue learning and can keep coming back.
    Thanks.Sand suppliers in Bangalore

    ReplyDelete
  18. Your blog keeps getting better and better! Your older articles are not as good as newer ones you have a lot more creativity and originality now keep it up! silver decorative solar jars with lights

    ReplyDelete
  19. Thanks for give me information on this topic. you have sharing very nice post.driveway paving contractor

    ReplyDelete
  20. This comment has been removed by a blog administrator.

    ReplyDelete
  21. This comment has been removed by a blog administrator.

    ReplyDelete
  22. This comment has been removed by a blog administrator.

    ReplyDelete
  23. Thanks a lot for sharing this amazing knowledge with us. This site is fantastic. I always find great knowledge from it.  black granite exporter

    ReplyDelete
  24. Really your post is really very good and I appreciate it. It’s hard to sort the good from the bad sometimes, but I think you’ve nailed it. You write very well which is amazing. I really impressed by your post
    Best seller of galaxy granite

    ReplyDelete
  25. This comment has been removed by a blog administrator.

    ReplyDelete
  26. A very good article on the Technics for stone cutting.
    Granite Countertops

    ReplyDelete
  27. The city has many parks and trails beside the Rocky Mountains, making the city a famous destination. With the mountains close to Colorado Springs, it has gained fame for its rock formations and other ecological features. Residential Paving Colorado Springs CO

    ReplyDelete
  28. This comment has been removed by a blog administrator.

    ReplyDelete
  29. Nice blog, great information you have shared. The best granite stone and paving slabs supplier offers high quality Granite stone, granite paving slabs in the USA. We offer Granite home delivery services in the USA. Call Today!
    paving slabs supplier USA

    ReplyDelete
  30. Nice blog, great information you have shared. The best granite stone and paving slabs supplier offers high quality Granite stone, granite paving slabs in the USA. We offer Granite home delivery services in the USA. Call Today!
    paving slabs direct workshop

    ReplyDelete
  31. Nice blog, keep sharing such updates. Best paving stone and slab supplier offers high quality paving stone and paving slabs in USA. Call us for paving slabs and stones in the USA.
    granite slabs for sale USA

    ReplyDelete
  32. Thanks for sharing such informative post. Indian paving sandstone supplier offers silver grey sandstone. We also offer Indian paving sandstone  in the UK.
    Indian Limestone UK

    ReplyDelete
  33. This is one of the best blog i have seen. Best Deck Builders and contractors in Dallas offer Patio building, new deck construction and deck replacement services in Dallas, Plano, Frisco, Allen, Rockwall TX. Call today +1800 456 789
    Deck Contractor Allen TX

    ReplyDelete
  34. Thanks for sharing this blog, I was looking for Granite slabs & tiles in the UK. This is the kind of blog i was looking from a long time.
    black limestone paving UK

    ReplyDelete
  35. I was looking for such blog from a long time. Thanks for sharing this blog.
    paving project packs USA

    ReplyDelete
  36. The use of natural stones has widely been integrated into several applications. With the onset of modern technology, the possibility of the natural stones' conversion into useful materials has come into being
    Thanks
    Marble temples for home
    Steel water jet cutting
    Marble and Granite Steps




    ReplyDelete
  37. Thank you for information
    3 Benifites of natural stones
    (1)Unique material
    (2)Versatility
    (3)Durability
    For more information visit https://oceanic6solutionz.com/bathroom-vanities.html

    ReplyDelete
  38. Describe Marble and Granite Steps. The igneous rock known as granite has light-colored granules that are large enough to be seen with the naked eye. It develops from the gradual

    ReplyDelete
  39. Stone cutting is a stone mason specialty. Great article!

    ReplyDelete